PTEK FM300ES 325Watt Transmitter

$3,213.00 $2,701.00
(You save $512.00)
(No reviews yet) Write a Review
SKU:
FM300ES
Weight:
25.00 LBS
PTEK FM300ES 325Watt Transmitter

FM Transmitter w/Exciter Up To 325W with Built-In Stereo Encoder

The new PTEK ES Series Exciters/Transmitters now a have built-in stereo encoder standard. Otherwise they are similar to the previous E Series models.

Designed and manufactured in the USA, PTEK solid-state FM exciters/transmitters cover 20 to 550 watt power ranges and offer full remote control ability. All models, from the 175-watt FM150ES and the 330-watt FM300ES, and even the 550-watt FM500ES boast frequency stability better than +200Hz (using PLL frequency synthesis from a high stability crystal oscillator). They also feature a comprehensive front-panel multimeter and over-temperature and SWR foldback to protect the unit by automatically reducing power output to a safe operating level. The stereo generator (previously sold separately) is now built in.

Built to last and robustly designed to withstand harsh environments where ambient heat and humidity can render products ineffective unless designed for these conditions. Switch mode power supplies provide consistent performance even when there are frequent power outages and voltage fluctuations making stressful demands on products that depend on electric power. Digital front panel metering indicates forward and reverse RF power; deviation; final output volts and amps. The frequency is easily set from the front panel. Meets or exceeds all FCC and CCIR standards.

You can combine the exciter with any PTEK RF power amplifier to obtain a final output power up to 5KW. All models are type verified for use in the USA (with the FM150ES and FM300ES FCC certified for use on LPFM stations). These units are made in the U.S.A. and include a 13 month warranty. Call and talk to our knowledgeable sales representatives to get exactly the model you need. BSW carries the entire PTEK line of transmitters, power amplifiers and accessories.

Main Features: 
• Totally Solid-State 
• Wide range input 88 to 264 VAC. 
• Built-in field programmable FSK ID for translators 
• Remote Control Interface 
• Built in Stereo Encoder 
• Designed and Manufactured in the U.S.A. 
• Compact 19 X 5.25 X 12” (25lbs shipping weight)

RF Power Output: 30 W – 330 W
Frequency Range: 87.7 – 107.9MHz
Audio Input Impedance: 600 Ohms
Audio Input Level (composite): 1.25 volts RMS (3.50 volts peak-to-peak) for +/- 75 kHz deviation
Audio Input R & L Stereo Generator: -10dBm
Frequency Response (composite): 20 Hz—15 (90) KHz
Pre-emphasis: 75 (50 μS to order)
Harmonic Distortion: less than 0.1%
Signal to Noise Ratio: >70 dB RMS
RF Output Impedance: 50 Ohms
Output Connector: N-Type Female
Harmonic Attenuation: Meets or exceeds FCC requirements
Power Requirements: 150-500W – 88 to 264 VAC
Dimensions and Packed Weight: 19” x 12” by 3RU; 22 lbs